Box & Rack

The back plate of the 72 place support is made from a single mould of 4 mm rigid High Impact PS. The peg sockets have closed ends eliminating leakage and consequent biohazards. The seamless drip channel collects waste which drains via drain tube provided. 72 push in pegs which can accommodate items with “neck” bore in excess of 15 mm are supplied and 11 small pegs of diameter 6 mm for small diameter items such as test tubes. They are easily removable for cleaning or to accommodate particularly shaped items. This rack will not stain or rust. Comes complete with mounting kit, draining hose, and fixing template. Additional racks can be joined together to make a bank of racks, using the joining plugs provided. Supplied with draining kit (connector + tubes). Discharging tube: internal 11 mm, external 13 mm.

The DuraPorter® translucent sealed specimen or sample transport tote is ideal for holding and storing a variety of laboratory equipment and samples:         

• Hazardous/sensitive research samples
• Clinical and Phlebotomy samples
• Blood bags and/or tissue/organ samples
• Public Health samples
• Laboratory instruments
• Biotransport carrier                                     

The DuraPorter® specimen or sample transport tote is a durable, waterproof, leak-proof container that is easy to load, securely locks and is ready for transport. Available in clear, translucent red and yellow, the DuraPorter® provides needed visibility for content identification and protection during sample transport.

Product Specs:

• Polycarbonate construction and available in three colors for user/owner identification
• Silicone water-tight seal and three lid clasps provide secure closure
• Carry handle folds neatly into body space allowing the units to be stacked
• Lid opens a full 180°, allowing total access to contents and making it easier to clean
• Will accommodate 13 and 16 mm tubes in a 72-place OneRack™, or similar sized/ brand of rack 
• Use the separators provided to create your own compartment sizes, or use empty to transport larger products and equipment
• Dimensions: L 15 in x W 7.7 in x H 6.3 in (38 cm x 19.6 cm x 16 cm)
• Autoclavable
• Compliant with U.S. standards, OSHA 29 CFR 1910.1030 and meets UN3373 compliant transport unit requirements.

This brightly colored, high density polyethylene foam rack is ideal for floating tubes in water baths, tubs or beakers

• Include detachable carrying handles to easily lift samples out of baths
• Made of high density polyethylene that resists water absorption
• Temperature range: 0° to 70°C
• Color: Yellow
• Tube Size: 1.5/2.0 mL
• Wells: 24
• Well Diameter: 9.3 mm
• Dimensions: 6 x 3.2 x 2.7 in (15 x 8.3 x 7 cm)
• Sold in packs of 5

Easy to assemble boxes made from polypropylene material

Supplied "flat packed" eliminating the hassle of stacking and reduces the amount of space needed for storage

Moisture resistant, more durable than cardboard boxes

Dividers included with the boxes

Can be used in mechanical freezers & vessels down to -196°C with appropriate temperature viable tubes

Vapor phase only

Wells: 81

Well Diameter: 12.1 mm

Tube Size: 1.5/2.0 mL

Dimensions: 5 x 4.9 x 1.9 in (12.5 x 12.5 x 4.9 cm)

Comes in packs of 10

Indexing: 1 to 20

Dimensions: 172 x 104 × 108 mm

Colours: Blue

Packaging: 1 rack

IsoFreeze® Flipper® temperature maintenance racks.

20 wells in 4 x 5 format.

Consistent thermal protection.

Maintains a temperature of -20ºC for a minimum of five hours.

One side holds 20 x 1.5/2.0 mL tubes, and the other side holds 20 x 0.5 mL tubes.

Tough polycarbonate material.

Racks are filled with an inert, non-toxic gel.

Lid included.

IsoTherm-System: IsoRack (work rack), IsoSafe (insulating box), IsoPacks (cool packs)

Ideal for cooling, transporting, and storing deep-frozen samples

Dry incubation technology reduces contamination risk associated with classical icebath incubation for safe sample handling

Holds up to 24 micro tubes (e.g., 0.5 mL or 1.5 mL/2.0 mL) for broad flexibility

IsoPack (cold pack) White maintains 0 °C for up to 6 hours 

Racks are stackable, autoclavable and can be centrifuged in the MTP rotor