Incubator
80L Li Series Incubator, Ambient+5 to 60°C
This Australian designed and built laboratory incubator cabinet is ideal to be used in laboratories, universities, and research institutes.
The fan forced heating system with microprocessor temperature controller ensures a stable temperature throughout the whole cabinet by circulating the air, allowing all products to be maintained at the correct temperature.
The high temperature alarm system prevents the temperature from getting too hot which ensures that the products are always at the correct temperature.
Adhesive Mat Tray to suit OM11 Shaking Incubator
Stainless steel tray with carry handles
Adhesive mat holds any flat bottom vessel in place
Simply wash with clean water to restore adhesive
Reusable thousands of times
Maximises usable platform area
Adhesive Mat Tray to suit OM25 Shaking Incubator
Stainless steel tray with carry handles
Adhesive mat holds any flat bottom vessel in place
Simply wash with clean water to restore adhesive
Reusable thousands of times
Maximises usable platform area
Digital Shaking Incubator 400 x 400mm platform. Temp range ambient + 6° to 75°C
400 x 400mm square orbital mixing platform
Ambient +6 to 70 deg C operation
Large LED digital temperature & speed display
3 x user-preset programs for speed & time
Fully transparent cabinet for easy observation
The OM11 is a compact bench top orbital mixer within a temperature controlled cabinet. Separate clearly marked controls and displays for temperature, speed, and timer ensure the OM11 is easy to operate and monitor. The counterbalanced drive system incorporates slow acceleration to reduce the risk of spillage plus a safety system that operates if an overload or jamming occurs. The platform is covered with a nitrile mat that is sufficient for holding containers at low speeds. For higher speeds optional racks are available. The RR10 Universal rack is ideal when a variety of different sizes and types of container are used. Fan assisted heating coupled with the custom microprocessor control ensures accurate temperature control within the cabinet. The cabinet cover is hinged at the top to allow easy access to the platform, for ease of cleaning the cabinet complete with the hinged cover can be removed without the need for tools.
Digital Shaking Incubator 600 x 450mm platform. Temp range ambient + 7° to 75°C
600 x 450mm orbital mixing platform
Large LED digital temperature & speed display
Ambient +7 to 75 deg.C operation
3 x user-preset programs for speed & time
Insulated cabinet for temperature stability
The OM15 is a heavy duty orbital mixer within a temperature controlled cabinet, and is designed to run for extended periods when required. Separate clearly marked controls and displays for temperature speed and timer ensure the OM15 is easy to use and monitor. Slow acceleration is incorporated in the drive system to reduce the risk of spillage, plus a safety system that cuts power to the drive if an overload or jamming occurs. Fan assisted heating coupled with the custom microprocessor control ensures accurate temperature control within the cabinet. The interior of the insulated cabinet is constructed from polished food grade stainless steel and the exterior from a corrosion resistant plastic. A Nitrile mat is supplied fitted to the platform and is sufficient for holding containers at low speeds. For higher speeds optional racks are available. The RR15 Universal rack is suitable for a variety of different sizes and types of container. Stainless steel Tulip clips are also available dedicated to conical flasks from 50ml to 2 litre.
Digital Shaking Incubator, 700 x 530mm platform, ambient + 5°C to 100.0°C
XLarge Cooling Orbital Shaking Incubator
700 x 530mm orbital mixing platform
Cold water heat exchanger for work below ambient
Large LED digital temperature & speed display
3 x user-preset programs for speed & time
Insulated cabinet for temperature stability
The OM25 is a heavy duty orbital mixer within a temperature controlled cabinet, and is designed to run for extended periods when required. Separate clearly marked controls and displays for temperature speed and timer ensure the OM25 is easy to use and monitor. Slow acceleration is incorporated in the drive system to reduce the risk of spillage, plus a safety system that cuts power to the drive if an overload or jamming occurs. Fan assisted heating coupled with the custom microprocessor control ensures accurate temperature control within the cabinet. A built in recirculation system allows for cooled water from an external source to be used and temperature control at and below ambient to be achieved. The Ratek RC4 Refrigerated cooler is most suitable for this purpose. A Nitrile mat is supplied fitted to the platform and is sufficient for holding containers at low speeds. For higher speeds optional racks are available. The RR25 Universal rack is suitable for a variety of different sizes and types of container. Stainless steel Tulip clips are also available dedicated to conical flasks from 50ml to 2 litre.
Labec 300L Refrigerated cycling incubator up to 50°C, standard fluoro lights on back wall only, 3 adjustable shelves
Internal dimensions: 600 W x 500 D x 900mm H
External dimensions: 730 W x 800 D x 1890mm H
Various lighting options & positions available
